TUBISCREEN FAT
Acrylate solymer dispersion
Binder dispersion for producing fat-like, colour-increasing prints. Used in combination with TUBISCREEN SE and KAT.
Very good running properties. Can be shaded with prigment dyestuffs if necessary.
pH-value:8.0-9.0
ionic character:anionic
TUBISCREEN GD 100
Preparation of acrylate copolymer
Ready for use paste for producing glossy prints by printing and fixing. Produces relatively soft, glossy prints with a good
fastness level. Moreover, the effects can be coloured. As much paste as possible should be applied to achieve a good
dlossy effect.
application amount:100%
pH-value:8.0-9.0
ionic character:anionic
TUBISCREEN GLS 100
Mix of fixing agents
Auxiliary for producing partial chintz recipes for prints, finishes, crepe resists and embossed prints. Produces soft, very
brilliant prints with a good fastness level. Moreover, the effects can be coloured and are fast to crepe.
application amount:20.0-180.0g/kg print paste
pH-value:8.0-9.0
ionic character:non-ionic
TUBISCREEN KAT
H-siloxane emulsion
Catalyzing and crosslinking component for producing fat-like, colour-increasing prints. Used in combination with
TUBISCREEN FAT and TUBISCREEN SE. Vary good running properties. Can be shaded with pigment dyestuffs if
necessary.
Makes prints elastic, adjusts handle and improves fastness levels.
pH-value:5.0-6.0
ionic character:non-ionic
TUBISCREEN SE
Polysiloxane emulsion
Auxiliary for producing fat-like, colour-increasing prints. Used in combination with TUBISCREEN FAT and TUBISCREEN
KAT.
Very good running properties. Can be shaded with pigment dyestuffs if necessary. Makes prints elastic, adjusts handle
and improves fastness levels.
pH-value:4.0-7.5
ionic character:non-ionic
TUBISCREEN MEF 120 GOLD
Metal bronze alloy
Highly viscous metal bronze paste prepared in water for producing very brilliant gold prints. Introduced into the basix
paste by stirring. Very good running properties. Print in the last position.
application amount:blended with the base paste TUBISCREEN NET(120-180g/kg)
ionic character:anionic
TUBISCREEN NET
Preparation of acrylate copolymer
Base paste for metal, pearlescent and glitter printing. Can be additionally coloured with usual pigment dyestuffs. The
prints stand out due to a high brilliance, a quite soft handle and good fastness levels which can be further increased by
adding TUBIFIX ML 50 or TUBIFIX P 150. Excellent running properties. Print in the last position. Screen fineness depends
on the pigment particle size.
application amount:depending on application recipe mixed with pigments
pH value:7.5-8.5
ionic character:anionic
TUBISOFT PS
Polysiloxane
Silicone softener for pigment printing. Gives prints an agreeable, dry and soft handle. Has simultaneously a positive
effect on the dry abrasion fastness. Not suitable for automatic dosage units.
application amount:2.0-8.0g/kg print paste
ionic character:non-ionic
TUBISOFT SEM
Polysiloxane emulsion
Silicone softener emulsion for pigment printing. Gives prints an agreeable, dry and soft handle. Has simultaneously a
positive effect on the dry abrasion fastness. TUBISOFT SEM can be rinsed with water, dosed and is suitable for
automatic dosage units.
application amount:3.0-10.0g/kg print paste
pH value:6.5-7.5
ionic character:non-ionic
TUBIVIS CP 3000
Polyacrylate(ammonium salt)
Universally applicable synthetic thickener powder for pigment printing. Free from hydrocatbons, thus particularly suitable
for ecologically optimized recipes.
application amount:9.0-11.0g/kg print paste
pH-value(1% sol):7.5-8.0
ionic character:anionic
TUBIVIS DL 600
Polyacrylate(ammonium salt)
Universally applicable synthetic thickener paste for pigment printing. Highly economical due to a low application amount.
application amount:12.0-15.0g/kg print paste
pH value(1% sol):5.0-6.0
ionic character:anionic
VISCALGIM-8000
Highly viscous sodium alginate(powder)
Thickener for reactive direct and 2-phase printing with good printin properties. Also suitable for printing with direct,
disperse, Rapidogen and vat dyestuffs according to the 2-phase printing and naphthols. VISCALGIM-8000 does not
contain preservatives. Preservatives such as CHT-PRESERVATIVE TDF should be added to the aqueous stocks as
soon as possible.
application amount:3.0-3.5% in the stock
(use sequestering agents based on polyphosphate). Stocks must be preserved separately.
12.0-15.0g/kg in the print paste
pH-value(in stock):6.5-8.0
ionic character:anionic
กก