RAPIDOPRINT S 50
Alkylol amide(liq)
Fixation auxiliary and antifrosting agnet for space-dyeing and printing on PA
Coacervate agent which has a fixing, antifrosting and levelling effect. Levels out differences in shades through steam
variations in the steamer and improves the stability of the print paste.
application amount:3.0-10.og/kg in the print paste
pH value:9.5-10.5
RAPIDOPRINT SC
Aliphatic hydroxyl compoun(liq)
Antifoam and deaerating agent for textile printing which promotes the wetting of the fabric and improves thus penetration.
Reduces spots from taking-off or unrolling the screens through screen release effect. Rrevents foam streaks at high
machine speeds.
application amount:0.5-2.0g/kg print paste
ionic character:non-ionic
RAPIDOPRINT SC-10
Aliphatic hydroxyl compounds(liq)
Antifoam and deaerating agent for textile printing which promotes the wetting of the fabric and improves thus penetrtion.
Reduces spots from taking-off unrolling the screens through screen release effct.
application amout:0.5-2.0g/kg print paste
ionic character:non-ionic
RAPIDOPRINT SC 15
Aliphatic hydroxyl compounds(liq)
Antifoam and deaerating agent for textile printing which promotes the evenness of the print onto paper. Reduces spots
from taking-off or unrolling the screens through screen release effect.
application amount:1.0-5.0g/kr print paste
ionic character:non-ionic
RAPIDOPRINT TB-2
Polysugar(liq)
Borax catcher. By adding RAPIDOPRINT TB-2 thickeners which have been finished with borax(and only swell in acid
water)can also be used in an alkaline medium.
application amount:3.0-10.0g/kr print paste. The application amount of borax and the pH value applied. Pretrals are
recommended.
pH value(aqu. sol):5.0-7.0
ionic character:non-ionic
RAPIDOPRINT TM2
Formulation of alkyl amines and polyglycol ethers(liq)
Auxiliary for burn-out printing which levels out the present acidity and prevents thus changes in shade of multivolour
burn-outs and yellowings of white burn-outs. The improved penetration facilitates the ease of removal of the carbonixed
fibre share.
Reduces of prevents corrosion in disperse discharge printing with stannous chloride.
application amount:20.0-30.0g/kg in the print paste
ionic character:non-ionic
RAPIDOPRINT W NEW
Formulation of alkylol amides and alcohols(liq)
Fixation accelerator and antifrosting agent for printing on wool.
application amount:10.0-20.0g/kg in the print paste
pH value:4.5-5.5
ionic character:(slightly)anionic
RAPIDOPRINT XR Granulate
Nitrobenzens sulphonate(gran)
Weak oxidizing agent for textile printing.
1. Protects dyestuffs which are sensitive to reduction at unfavourable steam conditions
2. Reduces halo formation in discharge printing(applying Ludigol)
3. Resisting agent for vat dyestuffs
4. Reoxidation of vat prints
Do not use on PA, PAC or wool since light shades may dull.
application amount:
1. 5.0-10.0g/kg print paste
2. 10.0g/l with pad or slop-pad application
3. 200.0g/kg print paste
4. 2.0-4.0g/l
pH value in sol:7.0-10.0
ionic character:anionic
TUBIFAST ABN 10
Acrylate and butadiene mix dispersion
Thermally self-crosslinking dispersion binding agent for pigment printing. Soft handle, excellent general fastness levels.
application amount:50.0-240.0g/kg print paste
pH value:8.0-9.5
ionic character:anionic
TUBIFAST AN 15
Acrylate copolymer dispersion
Thermally self-crosslinking dispersion binding agent for prigment printin. Very soft handle. Excellent fastness to light,
ageing and cleaning. Also suitable for pigment resist and discharge printing.
application amount:50.0-24.0g/kg print paste
pH value:8.0-9.0
ionic character:anionic
TUBIFAST BN 35
Butadiene copolymer dispersion
Thermally self-crosslinking dispersion binding agent for pigment printing. Excellent wet fastnesses and fastnesses to
cleaning. Soft handle, good elasticity.
application amount:50.0-240.0g/kr print paste
pH value:8.0-9.0
ionic character:anionic
TUBIFIX MF 200
Partially etherized N-methoxymethyl melamine
Polyfunctional crosslinking agent for improving the fashness levels of pigment prints on all kinds of fibres. The highly
reactive fixing agent should only be added to the print pastes just before printing. In the acid pH range and with higher
temperatures a premature crosslinking occurs which becones apparent in the increased viscosity.
application amount:5.0-15.0g/kg print paste
pH value:8.0-10.5
ionic character:non-ionic
กก