PRISULON SNP 113 S
Highly molecular polyacrylate(powder)
Thickener for PES direct printing with non-ionically finished disperse dyestuffs or for transfer prints on PES. Very good
printability and evenness. Free from adulterants and mineral oils. Can be precipitated in waste water. For afterhickening
of ready print pastes the pasty thickener PRISULON PD 300 is suitable.
application amount:6.0-10.0g/§¸ in the print paste
pH value in stock:7.0-8.0
ionic character:anionic
PRISULON SPE 7000
Polysaccharide combination(powder)
Thickener for disperse printing with an excellent colour yield and colour brilliance. Good evenness of prints and good
ease of removal(independent of the fixation process applied). Also suitable for alkaline resist printing.
application amount:8.0-8.5% in stock
45.0-50.0g/§¸ in the print paste
pH value in stock:9.5-11.5
ionic character:anionic
PRISULON T 10
Tamarind ether(powder)
Thickener for disperse printing with an excellent colour yield and colour brilliance. Good evenness and good ease of
removal of prints, especially on light and alkaline peeled PES qualities. Also suitable for alkaline resist printing and to a
limited extent for dicharge printing with stannous chloride.
application amount:9.0-10.0% in stock
45.0-50.0g/§¸ in the print paste
pH value in stock:9.5-11.5
ionic character:aniomic
RAPIDOPRINT H4
Hydrocarbon with emulsifiers(liq)
Self-emulsifying printing oil for improviung the runing properties of print pastes. The screens run smoother, the printing
behaviour is improved. The print paste films dry more elastic and can be removed more easily. Compatible with all
dyestuff classes. In extreme cases up to 50g/§¸ mau be used.
application amount:5.0-20.0g/§¸ in the print paste
ionic character:non-ionic
RAPIDOPRINT LM
Glycol ether(liq)
Hydrotropic dyestuff solunilizing agent for all soluble dyestuffs.
Synergetic effects with other solubilizing agents(e.g.thioethylene glycol). Prevents formation of clusters and dyestuff
gelling.
application amount:20.0-50.0g/§¸ in the print paste
pH value:8.0-9.0 with 20g/l in water
ionic character: non-ionic
RAPIDOPRINT M4
Polyglycol ether(liq)
Printing oil for transfer printing which improves running properties and prevents vibrations of the squeegee. Increses
limultaneously the evenness of the prints and the penetration into the transfer paper. With application amounts of more
than 30g/§¸ the abrasion and ghosting properties may be impaired.
application amount:5.0-15.0g/§¸ in the paste
pH value:7.0-8.0with 20g/l
ionic character:non-ionic
RAPIDOPRINT MS 30
Special polyvinyl alcohol(liq)
Film forming agent for transfer printing which improves the fastness to abrasion and the stavility storage of printed
papers. Prevents ghosting. The dyestuff transfer duting transfeming is not impaired.
application amount:60.0-120.0g/§¸ in the print paste
pH value:5.0-6.0
ionic character:non-ionic
RAPIDOPRINT NFS
Sulphoxylate compound(powder)
Reduction agent for direct and discharge printing with vat dyestuffs.
application amount:100.0-200.0g/§¸ print paste
pH value(150g/l):9.0-11.0
RAPIDOPRINT NWS
Polymeric carboxylic acid containing polyhosphate(liq)
Dispersing and sequestering agent for printing with thickeners containing alginates and for afterwashing of prints. Binds
annoying Ca ions, thus improving the flowing properties of print pastes containing alginates and their ease of removal
during afterwashing.
application amount:0.5-5.0g/§¸ in the print pasete
0.5-2.0g/l in afterwashing of prints
pH value(10% sol):5.5-7.5
ionic character:anionic
RAPIDOPRINT ORM
Aromatic sulphonate derivative(liq)
Dispersing agent for colour pigments. Improves the stability to dispersion in disperse and vat printing. Used in
combinagion with SARABID OL in afterwashing of prints with basic dyestuffs.
application amount:5.0-20.0g/§¸ print paste
2.0-4.0g/l afterwashing of prints
pH value:6.0-8.0
ionic character:anionic
RAPIDOPRINT PAN
Alkyl amide(liq)
Fixation accelerator for printing polyacrylonitrile. Accelerates and promotes the fixing conditions of basic, disperse and
metal complex dyestuffs. The colour depth is increased and the fixation time can often be reduced. Efficient in disperse
printing on acetate, less suitable on PES.
application amount:20.0-30.0g/§¸ in the print paste
pH value:2.5-4.5
ionic character:non-ionic
RAPIDOPRINT RE
Glycol ether(liq)
Fixation accelerator for printing with disperse dyestuffs.
Improves the colour depth and ease of removal of prints with disperse dyestuffs on PES and CT if fixation is done with
dry heat or HT steam.
application amount:10.0-25.0g/§¸ in the print paste
pH value:9.0-10.5
ionic character:non-ionic
ĦĦ