PADICOLL CA
Acrylic acid ester dispersion
Very soft binding agent, self-crosslinking, with a good fastness level and good running properties on the pad.
application amount:40.0-100.0g/l
pH value:7.5-9.5
ionic character:anionic
PADICOLL MV
Preparation of EO-PO adducts
Antimigrant with softening effect on continuous pigment dyeing
application amount:10.0-30.0g/l
pH value:6.0-9.0
ionic character:non-ionic
PADICOLL WBI
Alkylaryl ethoxylate
Padding auxiliary for pigment dyeing. Has a crosslinking effect, thus increasing penertation and evenness. Reduces the
formation of roller deposits.
application amount:5.0-20.0g/l
pH value(2% sol):5.0-7.0
ionic character:non-ionic
PRINTOBLANC AZ 50
Mix of special ethoxylates(liq)
Universal auxiliary for fast soaping of vat, sulphur, metal complex, acid, disperse and reactive prints. Has affinity to the
dyestuff, a good dispersing effect and a high washing power.
application amount:0.5-2.0g/l liquor
ionic character:non-ionic
PRINTOBLANC CPA
Alkyl ammonium ethoxylate(liq).
Afterwashing agent with affinity to the dyestuff for acid and metal complex d.yestuffs on PA, wool and silk in a slightly
alkaline medium. Reuves the risk of bleeding of white grounds.
application amount:1.0-2.0g/l liquor in the print paste
ionic character:cationic
PRINTOBLANC KPW
Sequestering agent based on phosphonate nad polyacrylate(liq).
Serves for fast soaping of reactive, vat, sulphur and naphthol prints and as sequestering agent for print pastes containing
alginate. Does not attack dyestuffs containing metal.
application amount:0.5-2.0g/§¸ stock in the print paste
1.0-2.0g/l liquor in afterwashing of prints
ionic charater:anionic
PRINTOBLANC P 3000
Fatty acid ethoxylate(liq).
Auxiliary for afterwashing of disperse and reactive prints on PES and PES/CO. Removes unfixed yestuff from the fibre
and prevents a reabsorption.
application amout:0.5-2.0g/l liquor in the print paste
ionic character:non-ionic
PRINTOBLANC SMK
Heterocyclic compound(liq).
Afterwashing agent for prints with vat and reactive dyestuffs.
Can be used alone or combined with PRINTOBLANC AZ 50.
The high affinity to the dyestuff prevents a bleeding of the white ground.
application amount:0.5-2.0g/l liquor in the print paste
ionic character:non-ionic
PRISULON 1550 S
Polysaccharide combination(powder)
Low viscous thickener for vat direct and discharge printing.
Excellent stability to chemicals as well as to reinforced alkaline whthe discharge pastes. Very good penetration and
colour yield. PRISULON 1550 S also swells well in presharpened stock water.
application amount:14.5-15.5% in stock
60.0-70.0g/§¸ PRISULON 1550 S in the print paste
pH in stock: 9.0-11.5
ionic charcater:anionic
PRISULON 530 R
Polysaccharide combination(powder)
Medium viscosity thickener for vat direct and 2-phase printing.
Coagulates well with borax without limiting the dyestuff transfer. Medium pentrating behaviour, good evenness and colour
yield.
application amount:5.0-5.5% in stock
25.0-30.0g/§¸ in the print paste
pH in stock:9.5-11.5
ionic character:anionic
PRISULON CMS 10
Starch ether(flakes)
Universal thickener as colour-intensify additive with other thickeners. Versatile use, good stability to alkali. Combined
with other thickeners in printing with vat, disperse, acid and direct dyestuffs.
applicatiom amount:9.0-10.0% in stock
50.0-60.0g/§¸ in the print paste
pH in stock:9.5-11.5
ionic charcater:anionic
PRISULON CR-F 60
Polyacrylate(paste)
Rheological additive for reactive printing. Preferably used in combination with alginates. Due to the increased
pseudoplastic behaviour the prints are better penetrated, more even and have an increased colour depth. If the product
is combined with alginates, approx. 20% less can be applied.
application amount:15.0-25.0g/§¸(combined with alginates) in the print paste
pH value in aqu. sol:9.5-11.5
ionic character:anionic
PRISULON DCA 1200 S
Guar ether(powder)
Universal thickener for textile printing on all kinds of fibres and with all dyestuff classes except reactive dyestuffs and
naphtholates. Well stable to water hardness, bivalent and trivalent metal salts, all common printing auxiliaries, bun0out and
disxharge chemicals. The colour depth can be increased by adding PRISULON CMS 10(starch ether). Due to the very low
viscosity the penetration capacity and the print result are optimal. PRISULON DCA 90 and PRISULON DNS 130 S with a
higher viscosity are more economical but don' t penetrate as well.
application amount:13.0-13.5% in stock
70.0-75.0g/§¸ in the print paste
pH in stock:6.5-8.0
ionic character:non-ionic
ĦĦ