CHT-Products, Program 02
in alphabetical order
CHT-ALGINAT EHV 3
Highly viscous sodium alginate(powder)
Thickener for reactive direct and 2-phase printing with good printing properties. Also suitable for printing with direct,
disperse, Rapidogen and vat dyestuffs with 2-phase printing and naphthols.
application amount:5.0-5.5% in stock(use sequestering agents based on polyphosphate) 25.0-30.0g/§¸ in the print
pastes
pH value in stock:6.5-8.0
ionic character:anionic
CHT-ALGINAT MV
Medium viscosity sodium alginate(powder)
Thicener for reactive direct and 2-phase printing with good printing properties and penetrating behaviour. Also suitable
for printing with direct, disperse, Rapidogen and vat dyestuffs with 2-phase printing and naphthos.
application amount:6.5-7.0% in stock(use sequestering agents based on polyphosphate) 35.0-40.0g/§¸ in the print
pastes
pH value in stock:6.5-8.0
ionic character:anionic
CHT-ALGINAT NV
Low viscous sodiim alginate(powder)
Inexpensive thickener for reactive direct and 2-phase printin with good printin properties and pentrating behaviour for
closely woven or voluminous articles. Also suifable for printing with direct, disperse, Rapidogen and vat dyestuffs with
2-phase printing and naphthols. Can also be applied as antimigrant in pad dyeing.
application amount:8.0-8.5% in stock(use sequesstering agents based on polyphosphate) 45.0-50.0g/l§¸ in the print
pastes
pH value in stock:6.5-8.0
ionic character: anionic
CHT-ALGINAT NV 10
Low viscous sodium alginate(powder)
Extremely low viscous thickener for reactive direct and 2-phase printing with good printing properties and excellent
penetrating behaviour for closely woven or voluminous articles. Also suitable for printing with direct, disperse,
Rapidogen and vat dyestuffs with 2-phase printing and naphthols. Can also be applied as antimigrant in pad dyeing.
application amount:8.5-9.0% in stock(use sequestering agents based on polyphosphate)45.0-50.0g/§¸ in the print pastes
pH value in stock:6/5-8.0
ionic character:anionic
CHT-ALGINAT SMT
Highly viscous sodium alginate(powder)
Thickener for reactive direct and 2-phase printing with good printing properties. Also suitable for printing with direct,
disperse, Rapidogen and vat dyestuffs with 2-phase printing and naphthols.
application amount:4.0-4.5% in stock(use sequestering agents based on polyphosphate) 20.0-25.0g/§¸ in the print
pastes
pH value in stock:6.5-8.0
ionic character:anionic
CHT-ANTIFOAM BSM
Universally applicable antifoam based on silicone emulsion.
Optimal compromise between efficiency and stability.
application amount:1.0-2.0g/§¸ print paste
0.02-0.5g/l in liquors
ionic character:non-ionic
CHT-ANTIFOAM GT 6
Mineral oil antifoam with special additives for textile printing(liq).
Mineral oil antifoam which is efficient in all temperature ranges.
Free from silicone. Can also be applied in afterwashing of prints. Do not add to preparations at temperatures>40¡É.
The diluting instructions in the technical leaflet must be carefully noted.
application amount:0.5-3.0g/§¸ print paste
0.2-1.0g/l in liquors
ionic character:non-ionic
CHT-PRESERVATIVE TDF
Heterocylic compound(liq).
Universally applicable preservative for aqueous stocks which are to be protected against microbial attack. Applicable
for adhesive preparations, pigment and dyestuff print pastes.
Can be applied with pH values of 4-9.
With pH values of>9 the preservativs slowly disintegrates depending on oH value and temperature. Due to this slow
disintegration CHT-PRESERVATIVE TDF is also suitable for preserving reactive prit pastes.
application amount:1.0-3.0g§¸ stock
pH value: 4.0-5.0
ionic character:non-ionic
LUXCOLOR TP
Preparation of polymeric binding agents
Ready for use paste for foil adhesives and glossy prints. After drying, the metallixed foil is either put on the fabric with
the silvery matt side on a transfer calender or with the glossy foil side for achieving brilliant lustre prints. LUXCOLOR TP
can also be used without foil application. With high application amounts in particular a very nice and high gloss is
achieved after fixation at 180-190¡É. In this case colouring should be made with pigment dyestuffs since LUXCOLOR TP
itself is dull.
application amount:100.0%
pH value:8.5-9.0
ionic character:anionic
¡¡